Part A, Baseline Mechanism You are on a design team working on a robotic mechanism and have been assigned the analysis of part of the mechanism. The…
Part A, Baseline Mechanism
You are on a design team working on a robotic mechanism and have been assigned the analysis of part of the mechanism. The part for you to analyse is shown below. This linkage has an actuator at point A that needs to apply a couple at point B of up to 2.5 N m. The angle range at point B is from 20 to 120 degrees. You need to determine the maximum torque (couple) required of the actuator at point A and the minimum length of rod AC.
Save your time - order a paper!
Get your paper written from scratch within the tight deadline. Our service is a reliable solution to all your troubles. Place an order on any task and we will take care of it. You won’t have to worry about the quality and deadlines
Order Paper NowFor the project you will plot the results for the length of AD, the force of the collar on AC at D and the required moment at A to keep the mechanism in equilibrium as functions of the angle at B. The approximate solutions with the angle at B equal to 20 degrees are:
- Length of AD = 78 mm
- Force of the collar on rod AC at D = 17 N
- Couple at A = 1.3 N m
Part B, Modified Mechanism
The lead designer would like to move the actuator at A 100 mm to the left. You need to analyse the new mechanism with the distance from A to B now modified to 250 mm.
You should:
- Identify and define known information.
- Draw the Free Body Diagrams of the rods BD and AC as well as the collar at D.
- Identify the information you need to find.
- Outline a solution procedure to find the information required.
The post Part A, Baseline Mechanism You are on a design team working on a robotic mechanism and have been assigned the analysis of part of the mechanism. The… first appeared on https://nursingessayswriters.com.
Part A, Baseline Mechanism You are on a design team working on a robotic mechanism and have been assigned the analysis of part of the mechanism. The… was first posted on November 15, 2020 at 3:59 pm.
©2019 "Submit Your Assignment". Use of this feed is for personal non-commercial use only. If you are not reading this article in your feed reader, then the site is guilty of copyright infringement. Please contact me at support@nursingessayswriters.com