overview of internetworking

Prepared by: Dr Jahan Hassan Moderated by: A/Prof Nalin Sharda Apr 2017

Assessment Details and Submission Guidelines

Trimester T2-2017

Unit Code MN503

Unit Title Overview of Internetworking

Assessment Type Assignment 2 – Individual, written and demonstration

Assessment Title Network design with configuration

Purpose of the assessment (with ULO Mapping)

Main purpose of this assignment is to enable student to configure networking devices for a given business case study and understand limitations of a network design. After successful completion of this assignment, students should be able to:

a. Investigate and resolve appropriate design and solutions for medium sized organisations.

b. Analyse and report on the current and future state of the management of internetworking infrastructure and its applications.

c. Discuss a roadmap process to use internetworking architecture to support long- term business goals.

d. Implement a process to support the administration and management of internetworking.

Weight 20% of the total assessments

Total Marks 60

Word limit 700

Due Date Week 11, demonstrate during laboratory class and submit report on Moodle

Submission Guidelines

● All work must be submitted on Moodle by the due date along with a completed Assignment Cover Page.

● The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font and 2 cm margins on all four sides of your page with appropriate section headings.

● Reference sources must be cited in the text of the report, and listed appropriately at the end in a reference list using IEEE referencing style.

Extension ● If an extension of time to submit work is required, a Special Consideration Application must be submitted directly to the School’s Administration Officer, on academic reception level. You must submit this application within three working days of the assessment due date. Further information is available at: http://www.mit.edu.au/about-mit/institute-publications/policies-procedures- and-guidelines/specialconsiderationdeferment

Academic Misconduct

● Academic Misconduct is a serious offence. Depending on the seriousness of the case, penalties can vary from a written warning or zero marks to exclusion from the course or rescinding the degree. Students should make themselves familiar with the full policy and procedure available at: http://www.mit.edu.au/about- mit/institute-publications/policies-procedures-and-guidelines/Plagiarism- Academic-Misconduct-Policy-Procedure. For further information, please refer to the Academic Integrity Section in your Unit Description.

MN503 Overview of Internetworking Page 2 of 4

Prepared by: Dr Jahan Hassan Moderated by: A/Prof Nalin Sharda August 2017

Assignment 2 Specification Business case study: Assignment 2 is an extension of assignment 1 work. Description

Report should include commands used to configure network devices, an analysis of the current network configurations as per requirements given below, and a demonstration of working of your designed network. You must Discuss step by step process to build the network for the chosen business case study from your assignment 1.

Write a report with the following contents

● Design a detailed Network in Netsim (You must not use packet tracer) which includes – Minimum of 4 switches (include series, model from your suggested first assignment report

details) – Minimum of 3 routers (include series, model from your suggested first assignment report

details) – 4 PCs

● Network device configurations

a. Switch configuration: – set hostname as your name – set system clock to May 2017 10:00 am – display the name of the file and version of IOS – display the name of the interfaces – display 6 IOS modes b. Router configuration – set hostname as your family name – set system clock to Jun 2017 1:00pm – display the name of the file and version of IOS – display the name of the interfaces – display 6 IOS modes

● Network device configurations

a. Switch configuration: – Set IP addresses on PC and switch – Create VLAN – Ping each other – Set VTP domain with your first name – Set VTP password with your family name – Demonstrate VTP packets b. Router configuration – set descriptions on interfaces, one with your name, second with your family name, third

with your middle name – display information about directly connected devices to router – Setup IP addresses for each interfaces – What is the subnet mask did you use?

MN503 Overview of Internetworking Page 3 of 4

Prepared by: Dr Jahan Hassan Moderated by: A/Prof Nalin Sharda August 2017

– Ping all 3 routers.

 Analysis of the current network: Analyse the current network configurations and suggest two application scenarios (other than your chosen case study) where you can implement your current network design. Provide justifications for each of your suggested scenario.

MN503 Overview of Internetworking Page 4 of 4

Prepared by: Dr Jahan Hassan Moderated by: A/Prof Nalin Sharda August 2017

Marking criteria

Section to be included in the report

Description of the section Marks

Detailed Network Design in Netsim

– Minimum of 4 switches – Minimum of 3 routers – 4 PCs

4

Network device configurations – Switch configuration

– set hostname as your name – set system clock to Feb 2017 11am – display the name of the file and version of IOS – display the name of the interfaces – display 6 IOS modes

5

Network device configurations – Router configuration

– set hostname as your family – set system clock to March 2017 3:30pm – display the name of the file and version of IOS – display the name of the interfaces – display 6 IOS modes

5

Switch configuration – Set IP addresses on PC and switch – Create VLAN – Ping each other – Set VTP domain with your first name – Set VTP password with your family name – Demonstrate VTP packets

6

Router configuration – set descriptions on interfaces, one with your name, second with your family name, third with your middle name

– display information about directly connected devices to router

– Setup IP addresses for each interfaces – What is the subnet mask did you use? – Ping all 3 routers.

5

Demonstration Demonstrate switch and router configuration in week 11 laboratory class

20

Troubleshooting steps Write details of problems faced during configurations, and how you solved it (troubleshooting).

5

Analysis of the current network

-Analyse the current network configurations and suggest two application scenarios (other than your chosen case study) where you can implement your current network design. -Provide justifications for each of your suggested scenario.

5

5

Total 60